Pressure Sensitive tape (1”) for Graphic Arts Film
Reference No           : Procedure No. 204 – 06 – 015 – 00
Specification :

Material

:

Cellulose film of good quality or un-plasticized PVC shall be the base.

 

 

 

Adhesive shall be transparent requiring no moisture, heat or other special preparation prior to application.

Size

:

The core shall be or Internal Diameter 75 ± 0.5 mm.  The cylindrical core shall be rigid enough not to collapse under usage and transportation conditions. The tape shall be approximately 65 meters length.

Adhesive

:

Shall pass practical test.

Stability

:

While unwinding the tape shall not leave any trace of adhesive on under layer.

Anchorage

:

Shall pass practical test.

Physical Properties

:

The roll shall be free from telescoping, ridging, fluting, peaking off core, oozing and gapping. While unwinding the tape shall be free cupping, spiraling, and legging and off sealing.  The roll shall be free from of side cuts and edge damage.  A roll of tape shall not have more than two joints.  The minimum distance between joints should be 20 meters.

Identification

:

Each roll, each container and the master packing shall have the following identification.
Manufacturer’s Name / Trade Mark

Packing

:

Roll shall be packed in Unit Carton of 6 Nos. in suitable container so that they are adequately protected from damage in transportation and from deterioration due to climatic condition and shall not adhere to each other or to the container.

Over printing

:

As per the art work