Pressure Tape 2” for Graphic Arts Film
Reference No.          :  Procedure No. 204 – 06 – 016 – 00
Specification            :

Material

:

BOPP(Biaxial Oriented Poly Propylene)

Adhesive Quality

:

Should pass HPF test

Size

:

Core shall be or Internal diameter 75.0 ± 0.5mm.  The cylindrical core shall be rigid enough not to collapse under usage and transportation conditions.  The tape shall be of the width of 48.0 ± 1mm.  The tape shall be approximately 65 meters length.

Stability

:

While un winding the tape shall not leave any trace of adhesive on under layer.

Anchorage

:

Shall pass practical test.

Physical Properties

:

The roll shall be free from telescoping, ridging, fluting, peaking off core, oozing and gapping.  While un winding the tape shall be free from cupping, spiraling, and legging and off sealing.  The roll shall be free from of side cuts and edge damage roll. A roll of tape shall not have more than two joints.  The minimum distance between joints should be 20 meters.

Identification

:

Each roll, Each container and the Master packing shall have the following identification.

   Manufacturer’s Name / Trade mark.

Thickness

:

55 ± 5 microns