Black Low Density Polythene Bags For Medical X-ray & Industrial X-Ray.
Reference No.           : Sub Table No. 19 – 04 / 20 – 03 . Procedure No.115 – 12 – 016 – 00
Specification             :

  •  

Material

:

Low density polyethylene

  •  

Colour

:

Black

  •  

Construction

:

The bags should be of tubular type in which only bottom should be heat-sealed by the supplier.  The sealing should be strong and perfect without any damages or holes.  (When filled to half its capacity with water there should not be any leakage in the sealing)

  •  

Thickness

:

800 Gauges ± 20 or 200 microns ± 5

  •  

Surface appearance

:

Smooth and free from sharp projections casting lines, white patches, blisters, waviness, dust and other foreign particles.

  •  

Viewing through 500 watt photo flood lamp

:

Should be opaque, must not show any pin-holes, streaks or transparent bands

  •  

Optical transmission density

:

Above 5.0

  •  

Photographic inactivity test

:

Should be photographically inert.

  •  

Static simulation test

:

Should pass HPF test

  •  

Dimension : (INNER)

 

Sl.No.

Size of film

Length

Breadth

Sealing width

 

(in inches)

(in cms)

(in mm)

(in mm)

(in mm)

  •  

4 x 15

 

450

140

10

  •  

4 ¾ x 6 ½

12.1 x 16.5

230

160

10

  •  

5 x 7

12.7 x 17.8

245

165

10

  •  

6 ½ x 8 ½

16.5 x 21.6

285

205

10

  •  

6 x 12

15.3 x 30.5

370

190

10

  •  

6 x 15

15.3 x 38.1

450

190

10

  •  

8 x 10

20.3 x 25.4

320

240

10

  •  

10 x 12

25.4 x 30.5

370

295

10

  •  

11 x 14

28.0 x 35.6

425

320

10

  •  

12 x 12

30.5 x 30.5

370

345

10

  •  

12 x 15

30.5 x 38.1

450

345

10

  •  

14 x 14

35.6 x 35.6

425

395

10

  •  

14 x 17

35.6 x 43.2

500

395

10

14.

10 CM X 24 CM

310

140

10

15.

10 CM X 40 CM

470

140

10

16

10 CM X 48 CM

550

140

10

17

30 CM X 40 CM

470

340

10

 

Tolerance ± 2 mm for length & breadth.    Tolerance ± 1 mm for S.Width